Recipes · Raku

Raku: the basics and the recipes

Fast firing, a glowing piece pulled from the kiln, smoke drawing on the clay. Start with the basics, then pick a recipe written for materials you can buy from a ceramic supplier.

Raku is decorative. The body stays porous and the glazes are unstable on purpose. A raku piece is never for food or drink.

The basics

Read these once before your first firing.

  1. What it is

    A short firing (1 to 3 hours) up to about 900–1000 °C. Once the glaze matures, the piece is pulled glowing from the kiln and put in a can with sawdust: smoke blackens the bare clay and seeps into the cracks of the glaze.

  2. The clay

    It has to survive thermal shock: a well-grogged body, even wall thickness and a low bisque, so the piece stays porous.

  3. When to pull

    The glaze goes through stages: it bubbles, looks like lava, pits, and finally smooths into a shine like water on ice. That is when you open the kiln. In raku you judge by eye more than by cone.

  4. Reduction

    A small metal can, a little combustible on the bottom, the piece inside and the lid on as soon as it catches, within about 15 seconds. Intensity comes from speed, not from more sawdust. Open the can with your face turned away: the air makes the fire flare.

  5. Safety

    Work outdoors, away from windows. Wear heat gloves, cotton clothes, a face shield and closed shoes. Never use treated wood, plywood or particle board for reduction: the glues release toxic fumes.

  6. Using the piece

    The body stays porous and raku glazes are unstable on purpose. A raku piece is decorative. It is never for food or drink.

The recipes

Amounts are parts by weight; a base adds up to 100 and colorants go on top. Three are open to everyone; the rest are on any paid plan.

Illustration of the expected effect: Clear crackle
AI illustration of the expected effect. Not a fired result.

Raku glazeCrackleBeginner

Clear crackle

Raku, about 950–1000 °C (1740–1830 °F)

Glossy clear glaze that crazes as it cools; smoke from the reduction gets into the cracks and draws a black network over the clay. The contrast is highest on a white body.

Version A · frit base

Base

Ferro Frit 3134or an equivalent calcium-borate frit85
EPK kaolinor any white kaolin15
Total100

Version B · Gerstley borate base

Base

Gerstley borateor a Gerstley substitute; test a tile first, substitutes behave differently80
Nepheline syenite20
Total100

Firing and reduction

Fire until the glaze is smooth and glassy. Pull the piece, leave it 10–20 seconds in the air so the crackle opens up, then put it in the can with sawdust. Lid it as soon as it catches fire and leave it 15–20 minutes.

A formulated starting point. We have not fired it in our studio with these exact materials yet, so test it on a tile before a real piece.

Illustration of the expected effect: White crackle
AI illustration of the expected effect. Not a fired result.

Raku glazeCrackleBeginner

White crackle

Raku, about 950–1000 °C (1740–1830 °F)

The raku classic: milky white with a bold black crackle that also covers dark clays.

The full recipe is on any paid plan

Ingredients, proportions and the firing walkthrough. Three recipes on this page are open to everyone.

Illustration of the expected effect: Copper: turquoise or luster
AI illustration of the expected effect. Not a fired result.

Raku glazeCopperIntermediate

Copper: turquoise or luster

Raku, about 950–1000 °C (1740–1830 °F)

One glaze, two results: strong reduction in a tight can gives copper red and metallic luster; if air gets in, or you open early, it goes to crackled turquoise. Every piece is different.

Version A · frit base

Base

Ferro Frit 3134or an equivalent calcium-borate frit85
EPK kaolinor any white kaolin15
Total100

Additions, on top of the base

Copper carbonate2.5
Tin oxideoptional; helps the copper red1

Version B · Gerstley borate base

Base

Gerstley borateor a Gerstley substitute; test a tile first, substitutes behave differently80
Nepheline syenite20
Total100

Additions, on top of the base

Copper carbonate2.5
Tin oxideoptional; helps the copper red1

Firing and reduction

For luster: a small can, little combustible, lid on within 15 seconds of ignition, and don't open before 15 minutes. For turquoise: let the piece cool longer in the air and reduce lightly, or open the can and let the flames lick it for a few seconds.

A formulated starting point. We have not fired it in our studio with these exact materials yet, so test it on a tile before a real piece.

Illustration of the expected effect: Lustrous black
AI illustration of the expected effect. Not a fired result.

Raku glazeMetallicIntermediate

Lustrous black

Raku, about 950–1000 °C (1740–1830 °F)

Deep black that, under strong reduction, picks up metallic and iridescent flashes (blue, purple, bronze) where it is thicker.

The full recipe is on any paid plan

Ingredients, proportions and the firing walkthrough. Three recipes on this page are open to everyone.

Illustration of the expected effect: Copper matte
AI illustration of the expected effect. Not a fired result.

Copper matteMatte copperIntermediate

Copper matte

About 1010 °C (1850 °F); use a pyrometer

Almost pure copper, no gloss: the piece comes out flashing red, orange, purple, blue and green, like weathered metal. The effect comes from the firing more than from the chemistry.

The full recipe is on any paid plan

Ingredients, proportions and the firing walkthrough. Three recipes on this page are open to everyone.

Illustration of the expected effect: Naked raku: resist slip
AI illustration of the expected effect. Not a fired result.

Naked raku · resist slipNaked rakuIntermediate

Naked raku: resist slip

About 930–980 °C (1700–1800 °F)

A layer that peels off after the firing. Underneath, the clay stays pale where the glaze protected it and turns black where smoke got through the cracks: fine, ink-like lines.

Recipe

Base

Fireclay50
EPK kaolinor any white kaolin30
Alumina hydrateor calcined alumina20
Total100

Firing and reduction

Best on burnished or terra-sigillata pieces. Apply a medium coat, let it dry, then cover it with the sacrificial glaze. More alumina makes it release more easily. After reduction, wash and scrub: slip and glaze come off together.

A formulated starting point. We have not fired it in our studio with these exact materials yet, so test it on a tile before a real piece.

No illustration for this one. The effect is described alongside.

Naked raku · sacrificial glazeNaked rakuIntermediate

Naked raku: sacrificial glaze

About 930–980 °C (1700–1800 °F)

A heavily crazing glaze that comes off with the resist slip. It is there only to draw the smoke lines on the clay.

The full recipe is on any paid plan

Ingredients, proportions and the firing walkthrough. Three recipes on this page are open to everyone.

Illustration of the expected effect: Red terra sigillata
AI illustration of the expected effect. Not a fired result.

Terra sigillataFinishBeginner

Red terra sigillata

Up to about 1000 °C (1830 °F); it loses its sheen above that

An ultra-fine clay coat that turns satin when buffed with a soft cloth, with no glaze. In raku it takes smoke softly, which makes it a good base for naked raku and horsehair.

The full recipe is on any paid plan

Ingredients, proportions and the firing walkthrough. Three recipes on this page are open to everyone.

No illustration for this one. The effect is described alongside.

Material substituteBase materialBeginner

Gerstley borate substitute blend

An ingredient: it replaces Gerstley borate in a recipe

Gerstley borate is the flux behind most classic raku glazes, and its supply has been uncertain for years. We worked out this blend to match its oxide chemistry: boron and calcium on target, a little less magnesium and sodium, a little more silica. It carries no water, so it is more concentrated: 81 g of the blend replace 100 g of Gerstley borate.

The full recipe is on any paid plan

Ingredients, proportions and the firing walkthrough. Three recipes on this page are open to everyone.

Fundamentals studied in Steven Branfman, Mastering Raku (Lark Books, 2009), a book worth owning if you fire raku. The recipes on this page are kilnmuse formulations with our own proportions.